Sputterbird Spreader Bars

Sputterbird in action
This “Sputterbird Spreader Bar” has muliple “Sputterbird” teasers directly behind the bar. This makes the bar shake and transmits this to the other squid. The “Sputterbirds” also follows the surface of the waves so the bar stays on the surface.

Vibrations travel down the center line to the stinger attached at the rear. The stinger also vibrates and moves by the action of the "Sputterbirds" which make the stinger look alive and struggling. Use of the Sputterbird teasers behind the bar allows you to run the the bar farther back from the boat.

The “Sputterbird Spreader Bar” is constructed with 400 lb. clear Jinkai line attached to a 36" stainless steel bar using heavy weight crimps and line protectors. Multiple lines drop back carrying 10  squid of varying colors and sizes. The last squid contains a hidden snap swivel for attaching a stinger. It is best to use a stinger with a nose weight to run 1-2 feet below the surface.

The “Sputterbird 17 Spreader Bar” is recommended for large fish as a teaser or lure by attaching a large stinger. It uses three #7 “Sputterbirds” behind a 48" spreader bar with twelve 15” plastic squids. It can be used with a greenstick rig to produce extra resistance and commotion.

#2 Sputterbird Spreader Bar

Picture
This has three #2 “Sputterbirds” behind a 36” bar followed by ten 9” squids.

#4 Sputterbird Spreader Bar

Picture
 Has three #4 “Sputterbirds” behind a 36” bar with ten 12” squids.

#7 Sputterbird Spreader Bar

Picture
Three #7 “Sputterbirds” behind a 36” bar and ten 15” squids.

#17 Sputterbird Spreader Bar

The “Sputterbird 17 Spreader Bar” is designed for large fish, both as a teaser and a lure. It uses three #7 “Sputterbirds” behind a 48” spreader bar containing twelve 15” plastic squids.

The #17 is also useful on a greenstick rig, producing extra water resistance and commotion. As a teaser or combined with a big stinger, it is truly an  effective lure.

See the Results!